🚗 How to Apply Your Car Decal


You’ll Need:

  • Your decal (with transfer tape already applied if needed)
  • Rubbing alcohol or glass cleaner
  • A clean cloth or paper towel
  • A squeegee or credit card


✅ Step-by-Step Instructions:

Clean the surface


Wipe down the area where you’ll place the decal using rubbing alcohol or glass cleaner. Make sure it’s completely dry and free of dust, oil, or wax.

Position the decal


Without removing the backing, place the decal on the surface to test the position. Use masking tape if you want to hold it in place.

Peel the backing


Slowly peel the white paper backing away, making sure the decal stays stuck to the clear transfer tape.

apply the decal


Carefully place the transfer tape with the decal onto the surface. Start from the center and press outward to avoid bubbles.

smooth it out


Use a squeegee or credit card to firmly rub over the decal. Go over the entire design multiple times.

remove the transfer tape (if any)

Slowly peel off the clear transfer tape at a sharp angle. The decal should stay on the surface. If part lifts, press it back down and rub again.

💡 Tips:

  • Apply in dry weather, ideally above 50°F (10°C).
  • Wait 24 hours before washing the car.